
Dual occupancy feasibility:
does it stack up?
Dual occupancy feasibility is the test to run before design money is spent, because two dwellings on one block is the biggest financial decision most landowners ever make. Here is how to test it properly, before anyone shows you a render.
A dual occupancy is feasible when the combined end value of both dwellings exceeds land, build, professional fees, holding costs, selling costs and tax by a margin that justifies the risk. Test that before design, not after.
Start at the end
Feasibility is one sum, run backwards.
Every dual occupancy comes down to the same arithmetic. Take what the two finished dwellings are worth. Subtract what the land is worth today, what the build costs, the professional fees, the holding costs, the selling costs and the tax. What is left is your margin, and it has to be big enough to pay you for eighteen months of risk.
Most projects that go wrong did not go wrong on site. They went wrong because that sum was run once, early, with optimistic end values and only half the cost lines. By the time the missing lines show up, the plans are drawn and the money is committed.
So run it properly, run it first, and run it with a builder who will tell you the real build cost rather than the one that keeps the project alive. If the numbers do not work on your block, that is a finding, not a failure.
The block decides first
What your land will actually allow.
Before any number matters, the site has to physically and legally hold two dwellings. In Melbourne's south east, the blocks that suit dual occupancy are usually the older, larger ones on established streets rather than anything in a recent estate.
- ✓Width and depth: a side-by-side needs frontage, a front-and-back needs a compliant driveway and turning area
- ✓Easements and services: a sewer or drainage easement through the middle of a block can end the idea outright
- ✓Overlays and covenants: a covenant limiting the site to one dwelling is not negotiable, and needs checking on title before anything else
- ✓Slope and soil: fall across the site drives retaining, drainage and footing costs on both dwellings
- ✓Trees: significant or protected vegetation can dictate where a building can go, or whether it can go there at all
- ✓Car parking and private open space: the two requirements that most often shrink an ambitious two-dwelling plan back to one
None of this needs to be expensive to establish. A title search, a look at the planning controls for the address and an hour on site with a builder will tell you whether the idea is alive before you engage a town planner.
The cost lines people forget
The build is not the whole cost.
Professional and authority costs
Town planning, architectural or design work, land survey, soil report, engineering, energy rating, permits and authority connections. These arrive before a single trade is on site and they are not small.
Site and demolition works
If an existing house has to go, demolition typically runs $20,000 to $40,000 for an average Melbourne home. Add service abolishment, retaining, site levelling and any tree works.
Holding costs
Rates, land tax, insurance, and interest on both the land and the drawn construction funds for the whole program. On a build that runs 9 to 12 months plus design and permits, this line is routinely underestimated.
Subdivision and exit costs
Survey and titling work to create two titles, then agent commission, marketing and legal costs on the way out. New dwellings also have GST consequences that depend entirely on your structure, so get your accountant's read before you commit.
Reading the result
When it works, and when it does not.
Numbers that kill a dual occupancy
- ✗End values taken from the best sale in the street rather than the average
- ✗A build cost estimated per square from a volume builder's brochure
- ✗No allowance for holding costs across the full design, permit and build program
- ✗A margin so thin that a three-month planning delay erases it
- ✗A site where parking and open space requirements force two compromised dwellings
Numbers that make one work
- ✓End values based on genuinely comparable recent sales, conservatively read
- ✓A build cost from the builder who will sign the contract, with selections specified
- ✓Every professional fee, holding cost and exit cost in the sum from day one
- ✓Margin that survives a delay, a rate move and a softer market
- ✓A block that holds two dwellings buyers actually want, without contorting either
- ✓One contract across both dwellings, so no cost sits between two contractors
A real one
Morris Court, Springvale.
A developer client came to us with a run-down house in Springvale and a straightforward idea: replace it with two townhouses. We took the project from plans to turnkey, ready for auction.
The design was driven purely by what buyers in that area were actually looking for, not by what maximised floor area on paper. That is the part most feasibility spreadsheets miss, because it does not show up as a line item until the sale.
One townhouse sold before auction and the other sold on auction day. The client was thrilled with the result, and we are already planning further projects together. The finish standard is what the valuation, the rent and the sale price all notice, which is why we build development work to the same standard as our custom homes.
What to do next
Test it before you fund it.
The cheapest stage of any development is the one before design. Get the title checked, get the planning controls for the address read, get a real build cost from a builder, and put every cost line in one sum with conservative end values.
We run dual occupancy and townhouse projects across Melbourne's south east, from established blocks in Pakenham through to the older suburbs closer in, and we give the feasibility read before design money is spent. If the numbers do not work, we say so, and you keep the money you would have spent finding out slowly.
Straight answers
Dual occupancy questions.
What size block do I need for a dual occupancy? +
There is no single number. Frontage, depth, easements, slope, trees and the parking and open space requirements matter more than area alone. A title check and a site visit settle it quickly.
What is a feasibility study actually telling me? +
Whether the combined end value of both dwellings exceeds land, build, fees, holding costs, selling costs and tax by enough to justify the risk. It is one sum, run with conservative numbers, before design.
Can I live in one and sell the other? +
Many owners do, and it changes the tax and finance treatment considerably compared with selling both. Get your accountant and broker involved early, because it also affects how you should structure the project.
Does a covenant stop a dual occupancy? +
It can. A covenant limiting the land to one dwelling is binding regardless of what planning controls allow. Check the title before spending anything on design.
How long does a dual occupancy take to build? +
A typical build runs 9 to 12 months, with permits taking 6 to 12 weeks beforehand depending on whether planning approval is needed as well as a building permit.
Do both dwellings sit under one contract? +
Yes. All dwellings go under a single contract with one builder responsible, so there is no juggling trades across units and no cost falling between two contractors.
Will you tell me if the numbers do not work? +
Yes, and plainly. A feasibility conversation costs nothing and an honest no early is worth far more than an optimistic yes that unravels after the plans are drawn.
Got a block with potential? Let us run the numbers.
A feasibility conversation costs nothing, and a straight no early is worth more than an optimistic yes.